Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. we got grbl-servo mod running on the contraption\\ it currently running a [[https://github.com/robottini/grbl-servo|grbl-servo]] mod that uses pin11 as pwm for the tiny servo see the grbl wiki for some tips> https://github.com/gnea/grbl/wiki other options, [[https://github.com/bdring/Grbl_Esp32/wiki/Pen-Servo-Feature|Grbl-esp32]] ====bCNC==== [[https://github.com/vlachoudis/bCNC|bCNC]] is a gui im trying\\ === release === https://github.com/vlachoudis/bCNC/releases === manual install=== needs python2.7, so we will use [[https://conda.io/miniconda.html|miniconda]] to manage python versions so in **CMD** #use chocolate to install from cmd, or just run the install above choco install miniconda #create virtual environment conda create --name py2k python=2 activate py2k #install dependencies conda install pyserial numpy Pillow PyHamcrest argparse pip install --upgrade bCNC #pip complains so i pip install argparse pip install --upgrade git+https://github.com/vlachoudis/bCNC pushd c:\bin git clone https://github.com/vlachoudis/bCNC cd bCNC pip install . #in git directory, note the dot pip install --upgrade bCNC to run #make sure you're in the virtualenv we set up before activate py2k python -m bCNC {{:pasted:20181218-131418.png}}